No.1 Industrial Avenue, Jinyuan Town,Dayi County, Chengdu, Sichuan, China
Home News

CNC WIRE LAYING MACHINE

Company News
CNC WIRE LAYING MACHINE
CNC WIRE LAYING MACHINE

 

CNC WIRE LAYING MACHINE

电熔管件的连接方法

Connection Methods of electrofusion fittings 焊接步骤

Welding Procedures


Elecrofusion fittings welding - canex wire laying solution

第一步 Step 1

1、 首先,切割管材确保管端光滑、平直。

1. Cut the pipes; assure that the pipe end are smooth and straight.

2、 测量电熔管件挡位圈至管件末端的长度(无挡位圈则测管件总长度的一半)。

2. Measure the vertical length between the fitting end and the limit circle ( measure half length of the fittings without limit circle)

3、 用记号笔在待焊接管材上标识出上述所测长度(即插入管件的深度)。 3. Mark the pipes with the above length (inserting length).

 

4、 用刮刀刮除管材标识长度的氧化层(0.1-0.2mm),并清除管端毛刺。

4. Scrape the oxidized layer of the pipes ( around 0.1-0.2mm), remove the burrs on the pipe end. 第二步 Step 2

5、 用丙酮清洁管端焊接区及管件的内表面,并用干净的抹布擦干,确保焊接部位完全干燥。 5. Clean the fusion area of the pipes and fittings with Acetone, completely dry the fusion area with clean cloth;

6、 不要用手触摸已清洁干燥的管材及管件表。

6. Do not touch the clean and dry pipes or fittings with hands 7、 将PE管材插入管件到标识线处,并检查配合尺寸。

7. Insert the pipes into the electro fusion fittings and stop at the length mark; check the size fitness.

 

8、 使用夹具将PE管材与管件进行固定,确保管材与管件中心线保持一致,并在焊接过程

中不移位。 8. Clamp the pipes and fittings at the same axis, do not move during welding.

 

第三步 Step 3

 

 

9、 将焊机的电极插头插入管件的电极插口中,确保完全接触。

9. Stick completely the plug of the welding machine into the socket of the fittings

10、 通过焊机扫描仪扫描管件的条形码(或手动)输入管件的焊接参数。

10. Read the bar code on the fittings by scanning pen or input the welding parameter manually.

11、 校验焊机所显示的熔接参数,如产品类型、电压、加热时间及冷却时间。

11. Check the welding coefficient showed on the machine, such as production type, voltage heating and cooling time.

第四步 Step 4

12、 按下“开始”按钮开始焊接过程,在接头的焊接过程中,整个连接件不能被移动。

12. Press " Start" button to carry on welding, do not move the clamp during welding.

13、 当焊机提示焊接结束后,管件的观察孔将会正常凸起(根据管材与管件配合间隙不 同,观察孔的高度可能会不同)。

13. Check and see if the welding indicators are protruded ( the welding indicators height vary with fit clearance between the pipes and fittings)


CX-32/160ZF
cx-32/250ZF
CX-63/160ZF
CX-160/400ZF
CX-250/630ZF
CX-315/630ZF
CX-400/800ZF
CX-630/1200ZF
Electrofusion fittings wire laying machine
电熔管件布线机 | 电熔管件绕线机 | 马鞍布线机 | 管件布线机 | 电熔管件注塑模具
www.wirelayingmachine.com CANEX CNC Electro fusion fittings wire laying machine

e/f fittings wire laying machine

Pub Time : 2017-03-08 10:32:56 >> News list
Contact Details
CANEX INTERNATIONAL CORP.,LTD

Contact Person: Mr. Allen

Tel: 86-028-88200310

Fax: 86-028-88200310

Send your inquiry directly to us (0 / 3000)

Request A Quote

E-Mail | Sitemap

Privacy Policy | China Electrofusion Wire Laying Machine Supplier. Copyright © 2016 - 2022 electrofusionwirelayingmachine.com. All Rights Reserved. Developed by ECER